The Wisefab BMW E36 angle kit features over 60 degrees of usable lock. Lightweight and durable lower control arms. Adjustable top mounts. Installation is very simple. Set your preferred toe and enjoy. All parts of the lock kit are available as spare parts.
Note! This kit does not fit M3 knuckles.
If you would like to know how the Wisefab Lock kit fits your drift car, please check the "Check Fitment" link below or click here!
For the rear, you can set up your car for better traction with the upper link and lower link (the upper arm replaces the spring carrier arm). We also offer trailing arm bushings.
Scroll down to easily order spare parts here.
Recommended alignment parameters are as follows:
Toe in/out: 0
Camber: -5
Caster: 4.5
- Higher roll center
The Wisefab suspension kit raises the front roll center even on lowered cars, increasing roll stiffness and allowing you to maximize lock by removing the front anti-roll bar (sway bar). - Corrected steering geometry (Ackermann)
Normally, the inner wheel angle is greater than the outer wheel in corners. For drifting, this means a loss of speed and grip, and we have determined this provides the best performance. - Good camber control at high steering angles
At high steering angles, front wheels get positive camber, which is not a positive effect. Front grip decreases, and a transition of the contact patch from the inner edge to the outer edge occurs during a turn or flip. This cannot be eliminated, but we have reduced it as much as possible using geometry. - Steering jack control
When drifting, as the steering angle increases, the same geometry can cause excessive jacking, which can be problematic. We monitored this and modified the geometry to ensure no handling issues occur. - Predictable self-alignment control
With certain suspension geometries, the steering wheel can lock at high angles, requiring the driver to apply force to flip the wheel back. We have identified the cause and minimized it, if not eliminated it entirely. - Adjustable lock stoppers.
- Stronger inner ball joint design than OEM and previous Wisefab versions.
Kit contents:
- Adjustable coilover upper mounts, Formula Drift compliant
- Hub add-ons with hardware
- Lightweight lower control arms
- Assembled tie rods
- Adjustable lower control arm rear mounts
- Installation guide
Other components, packaging, and clearances.
- This kit assumes sufficient clearance for coilovers.
- Tire diameter of 620mm (235/40 R17) or less is recommended.
- This kit requires wide fenders or fender flares.
Before Ordering
〇 Regarding Import Taxes
At the Shaftoya shopping site, we pay the import taxes incurred at the time of import on your behalf, so there are no additional charges beyond the total amount paid at checkout.
〇Checking Fitment
Our entire product database is based on North American vehicles (USDM), so please check the compatibility with Japanese vehicles (JDM) before ordering. (Please feel free to contact us if you are unsure if a listed product fits your vehicle. Our support team will investigate for you.)
If you order without checking fitment, we cannot accept returns due to incompatibility.
Please note that even if items are sorted by choosing the year, manufacturer, and vehicle model in the tabs on our top page, this does not necessarily mean they fit Japanese model vehicles without modification.
All products have been translated into Japanese using translation software. As there may be confusing expressions, please contact us before ordering if you have any questions.
○ Regarding Delivery
Shipping costs are paid at the time of payment. For shipping cost estimates, these are automatically calculated when you enter your shipping address on the checkout page. For large items such as body parts, there may occasionally be a significant discrepancy between the automatically calculated shipping cost and the actual cost. In such cases, we will contact you individually by email.
Basically, all products are shipped internationally from our US warehouse. Unlike domestic shipping in Japan, international shipping takes about 7-14 days, so please allow plenty of time for your order. If you are in a hurry, please contact us in advance to confirm delivery times. Note that all products are transported by air; they are not shipped by sea.
○ Regarding Japanese Vehicle Inspection (Shaken) Compatibility
Basically, all products we handle are designed and manufactured outside of Japan. Please understand that they do not conform to the "Japanese Vehicle Inspection System," and we cannot provide strength calculation sheets for that purpose. Therefore, all parts are sold for the purpose of "circuit, private property, or off-road use," and installation and use are at your own risk.
○ Regarding Warranty
Please check the contents immediately upon arrival. Since all products are shipped internationally from outside Japan, there may be shipping damage to the packaging or the product itself. We will provide returns, refunds, or replacement exchanges only if you contact us within 7 days of receipt regarding damaged products, defective items, or items different from what was ordered. Please understand that for products sold through us, we handle warranty-related matters "only through our company." We do not handle matters through other companies or distributors located within Japan.