The Wisefab BMW E30 angle kit provides over 60 degrees of lock. Lock is the most important parameter everyone talks about in drifting, and we have it! The E30 control arms are lightweight and durable. The E30 lock kit is a bolt-on solution ready for immediate use, making installation extremely easy. Simply set your preferred toe and enjoy. All parts of the lock kit are available as spare parts.
If you want to see how the Wisefab lock kit fits your drift car, use the CHECK FITMENT link or click here!
Scroll down to easily order spare parts here.
Recommended alignment parameters are as follows:
Toe: 0
Camber: -7
Caster: 8
- Increased roll center
The Wisefab suspension kit raises the front roll center even on lowered cars, increasing roll stiffness and allowing you to maximize your lock by removing the front anti-roll bar (sway bar). - Steering geometry correction (Ackermann)
Normally, the inside wheel has a larger angle than the outside wheel in a corner. In drifting, this means less speed and grip, so we determined that this provides the best performance. - Good camber control at high steering angles
At high steering angles, the front wheels gain positive camber, which is not a positive effect. This decreases front grip and causes a transition of the contact patch from the inner edge to the outer edge during a turn or flip. We couldn't eliminate this entirely, but we have minimized it as much as possible through geometry. - Steering jacking control
During drifting, as the steering angle increases, the same geometry can cause excessive jacking, which can be problematic. We have monitored this and modified the geometry to ensure no handling issues occur. - Predictable self-alignment control
With certain suspension geometries, the steering wheel may lock at the end at high steering angles, requiring the driver to apply force to flip the steering wheel to the opposite side. We understand the cause and have minimized it, if not eliminated it.
Kit contents:
- Adjustable coilover upper mounts, Formula Drift compliant
- Hub add-ons with hardware
- Lightweight lower control arms
- Assembled tie rods
- Adjustable lower control arm rear mounts
- Installation guide
Other components, packaging, and clearance.
- BMW E36 inner tie rods required
- This kit assumes sufficient clearance for coilovers.
- Tire diameter of 620mm (235/40 R17) or less is recommended.
- This kit requires wide fenders or fender flares.
Before Ordering
〇 Regarding Import Consumption Tax
At the Shaftoya shopping site, we pay the import consumption tax incurred upon importation on your behalf, so there will be no additional charges beyond the total amount paid at checkout.
〇Fitment Confirmation
Our entire product database is based on North American vehicles (USDM), so please confirm whether the product can be installed on Japanese domestic vehicles (JDM) before ordering. (If you are unsure if a listed product fits your vehicle, please feel free to contact us. Our support team will investigate for you.)
If you order without confirming fitment, we cannot accept returns due to incompatibility.
Please note that even if items are sorted by selecting the year, manufacturer, and vehicle model in the tabs on our top page, this does not necessarily mean they will fit Japanese model vehicles without modification.
All products are translated into Japanese using translation software. There may be confusing expressions, so please contact us before ordering if you have any questions.
○ Regarding Delivery
Shipping costs are paid at the time of payment. Shipping estimates are calculated automatically when you enter your shipping address on the checkout page. For large items such as body parts, there may occasionally be a significant discrepancy between the automated shipping calculation and the actual shipping cost. In such cases, we will contact you individually via email.
In principle, all products are shipped internationally from our US warehouse. Unlike domestic Japanese shipping, international shipping takes about 7 to 14 days, so please order with enough time to spare. If you are in a hurry, please contact us to confirm the delivery date in advance. All products are shipped via air freight; we do not use sea freight.
○ Regarding Japanese Vehicle Inspection (Shaken) Compatibility
In principle, all products we handle are designed and manufactured outside of Japan. Please note that they are not compliant with "Japanese vehicle inspection standards," and we cannot provide strength calculation documents or similar paperwork for these standards. Therefore, all parts are sold for the purpose of "use on circuits, private property, or off-road," and installation and use are at your own risk.
○ Regarding Warranty
Please check the contents immediately upon arrival. As all products are shipped internationally from outside Japan, there may be delivery damage to the packing box or the product. Please understand that we will only provide returns, refunds, or replacement exchanges for items with delivery damage, defective items, or items different from your order if you contact us within 7 days of receipt. Furthermore, regarding products sold through us, we will handle all warranty-related matters "exclusively through us." Please note that we do not handle matters through other companies or agents located within Japan.