The Wisefab BMW E30/36 is for the BMW E30, but it uses the BMW E36 front suspension. The Wisefab E30/36 angle kit features over 60 degrees of lock. The most important parameter that everyone talks about in drifting is lock. We have it! The E30/36 control arms are lightweight and strong. The E30/36 lock kit is a bolt-on solution that is ready to use and extremely easy to install. Simply set your preferred toe and enjoy. All parts of the lock kit are available as spare parts.
Scroll down to easily order spare parts here.
Recommended alignment parameters are as follows:
Toe-in/out: 0
Camber: -7
Caster: 8
- Higher roll center
The Wisefab suspension kit raises the front roll center even on lowered cars, increasing roll stiffness and allowing you to maximize lock by removing the front anti-roll bar (sway bar). - Corrected steering geometry (Ackermann)
Normally, the inner wheel angle is greater than the outer wheel in corners. For drifting, this means a loss of speed and grip, which we determined provides the best performance. - Good camber control even at high steering angles
At high steering angles, the front wheels develop positive camber, which is not a positive effect. This causes a decrease in front grip and a transition of the contact patch from the inner edge to the outer edge during a turn or flip. While this cannot be eliminated, we have minimized it as much as possible through geometry. - Steering jacking control
When drifting, as the steering angle increases, the same geometry can cause excessive jacking, which can be problematic. We monitored this and modified the geometry to ensure no handling issues arise. - Predictable self-alignment control
With certain suspension geometries, the steering wheel may lock at the end at high steering angles, requiring the driver to apply some force to flip the steering wheel to the opposite side. We have identified the cause and minimized it, if not entirely eliminated it.
Kit contents:
- Adjustable coilover upper mounts, Formula Drift compliant
- Hub add-ons with hardware
- Lightweight lower control arms
- Assembled tie rods
- Adjustable lower control arm rear mounts
- Installation guide
Other components, packaging, and clearance.
- This kit assumes there is sufficient clearance for the coilovers.
- Tire diameter of 620mm (235/40 R17) or less is recommended.
- This kit requires wide fenders or fender flares.
Before Ordering
〇 Regarding Import Consumption Tax
At the Shaftoya shopping site, we pay the import consumption tax incurred at the time of import on your behalf, so there are no additional charges beyond the total amount paid at checkout.
〇 Confirmation of Compatibility
All product databases are based on North American vehicles (USDM), so please confirm whether or not installation on Japanese vehicles (JDM) is possible before ordering. (If you are unsure whether the listed product is compatible with your vehicle, please feel free to contact us. Our support team will investigate for you.)
If you order without confirming compatibility, we cannot accept returns due to incompatibility.
Please note that even if products are sorted by selecting the year, manufacturer, and vehicle model in the tabs on our top page, this does not necessarily mean they will fit Japanese model vehicles without modification.
All products have been translated into Japanese using translation software. As there may be confusing expressions, please contact us before ordering if you have any questions.
○ Regarding Delivery
Shipping costs are paid at the time of payment. Shipping cost estimates are automatically calculated when you enter your shipping address on the checkout page. For large items such as body parts, there may occasionally be a significant discrepancy between the automatically calculated shipping cost and the actual shipping cost. In such cases, we will contact you individually via email.
All products are generally shipped internationally from our US warehouse. Unlike domestic shipping in Japan, international shipping takes about 7 to 14 days, so please order with enough time. If you are in a hurry, please contact us in advance to confirm the delivery date. Note that all products are transported by air freight. They are not shipped by sea freight.
○ Regarding Japanese Vehicle Inspection (Shaken) Compatibility
All products we handle are basically designed and manufactured outside of Japan. Please understand that they do not conform to the "Japanese Vehicle Inspection System," and we cannot provide strength calculation documents or similar items for the Japanese vehicle inspection system. Therefore, all parts are sold for the purpose of "use on circuits, private property, or off-road," and installation and use are at your own risk.
○ Regarding Warranty
When the product arrives, please check the contents immediately. As all products are shipped internationally from outside Japan, there may be shipping damage to the packing box or the product itself. Please understand that we will only handle returns, refunds, or exchanges for shipping-damaged items, defective products, or incorrect items if you contact us within 7 days of receipt. Please note that for products sold through us, we will only handle warranty-related matters "through us." We do not handle matters through other companies or agents located within Japan.