The IS300 / JZX90 / JZX100 Mini Mantis angle kit is a unique option for chassis that use lower control arm adapters and steering knuckle adapters. This design extends the chassis control arms by 35mm and bolts on without the need to cut and weld stock arms to lengthen them. Another benefit is the knuckle adapter, which corrects the roll center and allows for a shorter steering ratio when running increased angle. It is Ackerman adjustable and has built-in bump stops that can be adjusted to suit your angle needs. Since many of the same parts are used, these items can also be used to further evolve the kit into a MILD or MEGA Mantis kit.
The MINI kit can be used with stock or aftermarket caster/compression arms. If you wish to use FDF compression arms, they can be ordered separately later.
-Angle: 55 degrees+, depending on steering rack offset and wheel setup
-Tie rods: The kit includes tie rod adapters to connect to the knuckles
-Ackerman: Adjustable Ackerman (other settings available upon request)
-Roll center: Optimizes handling by adding 30mm of roll center correction
-Bump steer: Corrected bump steer for lowered ride height
-Caster: Optimized caster and trail for ideal alignment torque feedback
-Camber: Optimized camber in the range of -3 to -6 degrees
-Track width: 35mm wider per side for a stable, high-clearance front end
-Suspension travel: Long travel range; improved from full lock to full lock throughout the entire suspension travel for better grip
-Joints: Chromoly heim joints and spherical bearings with self-lubricating nylon races, easily replaceable
-Weight reduction: Lighter and stronger design due to the compact drop-knuckle design; arms feature a scissor-frame structure with crumple zones to prevent damage to mounting points upon impact, utilizing 7075 aluminum where possible to achieve steel-like strength with 40% less weight.
Note* This kit must be run using some form of adjustable or extended upper control arms to achieve the recommended camber range of -3 to -6 degrees (-6 is the recommended maximum).
- For off-road/circuit use only -
Before Ordering
〇 Regarding import consumption tax
At Shafutoya Shopping Site, we pay the import consumption tax incurred at the time of import on your behalf, so there will be no additional charges other than the total amount paid at checkout.
〇Confirmation of Compatibility
Our product database is based on North American vehicles (USDM), so please check the compatibility with Japanese vehicles (JDM) before ordering. (If you are unsure if a listed product is compatible with your vehicle, please feel free to contact us. Our support team will be happy to assist you.)
If you order without confirming compatibility, we cannot accept returns due to incompatibility.
Please note that even if products are sorted by selecting the year, manufacturer, and vehicle model in the tabs on our top page, it does not necessarily mean they are compatible with Japanese model vehicles without modification.
All products have been translated into Japanese using translation software. As there may be confusing expressions, please contact us before ordering if you have any questions.
○ Regarding Shipping
Shipping fees are paid at the time of settlement. An estimate of shipping fees is automatically calculated when you enter your shipping address on the checkout page. For large items such as body parts, the actual shipping cost may occasionally differ significantly from the amount automatically calculated. In such cases, we will contact you individually by email.
Basically, all products are shipped internationally from our U.S. warehouse. Unlike domestic shipping in Japan, international shipping takes about 7 to 14 days, so please allow yourself enough time when ordering. If you are in a hurry, please contact us in advance to check the delivery time. Please note that all products are transported by air. They are not shipped by sea freight.
○ Regarding Compliance with Japanese Vehicle Inspection (Shaken)
The products we handle are basically designed and manufactured outside of Japan. Please note that they do not comply with the "Japanese vehicle inspection system" in any way, and we cannot provide strength calculation documents for such purposes. Therefore, all parts are sold for the purpose of "circuit, private property, and off-road use," and installation and use are at your own risk.
○ Regarding Warranty
Please check the contents immediately upon arrival. Since all products are shipped internationally from outside Japan, there may be shipping damage to the packaging or the product itself. Please understand that we will only provide returns, refunds, or replacement products if you contact us within 7 days of receipt regarding products with shipping damage, defective products, or products different from what you ordered. Please note that for products sold through us, warranty-related support will be provided "only through us." We do not provide support through other companies or distributors located within Japan.