The V2 kit now allows for adjustments to the Ackermann angle (via knuckle add-ons) and caster (via top mounts). These new features make adjustments more convenient.
Note! The V2 kit is suitable for both standard models and the M3.
If you would like to know how the Wisefab Lock kit fits your drift car, please check the "Check Fitment" link below or here!
For the rear, we also offer a complete solution including our unique design trailing arms, lower links, and V2 upper links
Scroll down to easily order spare parts here.
Recommended alignment parameters are as follows:
Toe In/Out: 0
Camber: -5
Caster: 4.5
- Increased Roll Center
The Wisefab suspension kit raises the front roll center even on lowered cars, increasing roll stiffness. - Adjustable Steering Geometry (Trail and Ackermann)
You can adjust the steering geometry to positive or negative Ackermann in just a few minutes, even trackside, without disturbing the alignment. - Good Camber Control at High Steering Angles
At high steering angles, the front wheels tend toward positive camber, which is not a positive effect. This reduces front grip and causes a shift in the contact patch from the inner edge to the outer edge during a turn or flip. While this cannot be entirely eliminated, it has been minimized as much as possible through geometry. - Steering Jack Control
During drifting, as the steering angle increases, the same geometry can cause increased jacking, which can be problematic. We have monitored this and modified the geometry to ensure no handling issues occur. - Predictable Self-Alignment Control
With certain suspension geometries, the steering wheel may lock at high steering angles, requiring the driver to apply significant force to flip it back. We have identified the cause and minimized, if not eliminated, this behavior. - Adjustable lock stoppers.
- Stronger inner ball joint design than OEM and older Wisefab versions.
Kit contents:
- Adjustable coilover upper mounts, Formula Drift compliant
- Hub add-ons with Ackermann adjustment hardware
- Lightweight lower control arms
- Assembled tie rods.
- Adjustable lower control arm rear mounts
- Installation guide
Other components, packaging, and clearance.
- This kit assumes sufficient clearance for coilovers.
- We recommend a tire diameter of 645 mm (235/40 R18) or less.
- This kit requires wide fenders or fender flares.
Before Ordering
〇 Regarding Import Consumption Tax
At the Shafutoya shopping site, we pay the import consumption tax incurred at the time of import on your behalf, so there are no additional charges beyond the total amount paid at checkout.
〇Fitment Confirmation
Our entire product database is based on North American vehicles (USDM). Please confirm whether or not parts can be installed on Japanese vehicles (JDM) before ordering. (Please feel free to contact us if you are unsure if a listed product fits your vehicle. Our support team will investigate for you.)
If you order without confirming fitment, we cannot accept returns due to incompatibility.
Please note that even if items are sorted by selecting the year, manufacturer, and vehicle model in the tabs on our home page, this does not necessarily mean they will fit Japanese model vehicles without modification.
All products have been translated into Japanese using translation software. As there may be confusing expressions, please contact us before ordering if you have any questions.
○ Regarding Delivery
Shipping costs are paid at the time of payment. Shipping estimates are calculated automatically when you enter your shipping address on the checkout page. For large items such as body parts, there are rare cases where there is a significant discrepancy between the automatically calculated shipping cost and the actual cost. In such cases, we will contact you individually via email.
Essentially, all products are shipped internationally from our US warehouse. Unlike domestic shipping in Japan, international shipping takes about 7 to 14 days, so please order with time to spare. If you are in a hurry, please contact us in advance to confirm delivery times. All products are transported via air freight; they are not shipped via sea freight.
○ Regarding Japanese Vehicle Inspection (Shaken) Compatibility
Please note that all products we handle are basically designed and manufactured outside of Japan. They are not compliant with the "Japanese Vehicle Inspection System," and we cannot provide strength calculation sheets or similar documents for that purpose. Therefore, all parts are sold for the purpose of "use on circuits, private property, or off-road," and installation and use are at your own risk.
○ Regarding Warranty
Please check the contents of your order immediately upon arrival. Since all products are shipped internationally from outside Japan, there may be shipping damage to the packaging or the product itself. We will handle returns, refunds, or replacements for products with shipping damage, defective products, or incorrect items only if you contact us within 7 days of receipt. Please understand that for products sold through us, warranty support will be provided "only through us." We do not provide support through other companies or agents located within Japan.