The Wisefab Narrow Lock Kit (for BMW E36) is similar to the PRO kit but has fewer features and does not widen the car as much. This is particularly beneficial if you want to keep the car road-legal or avoid excessive overfenders. With this kit, you can achieve a maximum steering angle of 55 degrees.
- Increased roll center
The Wisefab suspension kit raises the front roll center even on lowered cars, increasing roll stiffness and allowing for maximum use of the lock by removing the front anti-roll bar (sway bar). - Steering geometry correction (Ackermann)
Normally, the inner wheel has a greater angle than the outer wheel in corners. For drifting, this means less speed and grip, and we have determined this provides the best performance. - Good camber control at high steering angles
At high steering angles, the front wheels go into positive camber, which is not a positive effect. This reduces front grip and causes a transition of the contact patch from the inner edge to the outer edge during a turn or flip. While this cannot be eliminated, we have reduced it as much as possible using geometry. - Steering jacking control
When drifting, as the steering angle increases, the same geometry can cause excessive jacking, which may become an issue. We have monitored this and modified the geometry to ensure no handling problems occur. - Predictable self-alignment control
With certain suspension geometries, the steering wheel may lock at the end of high steering angles, requiring the driver to apply some force to flip the wheel in the opposite direction. We understand the cause and have minimized, if not eliminated, it.
Kit contents:
- Knuckle add-ons with hardware
- Lightweight lower control arms
- Assembled tie rods.
- Adjustable lower control arm rear mounts
- Installation guide
Other components, packaging, and clearance.
- This kit assumes sufficient clearance for coilovers.
- This kit requires wide fenders or fender flares.
- Fits perfectly under OE E36 fenders with 18x8 inch ET45 wheels (225/45 R18)
Before ordering
〇 Regarding import consumption tax
At the Shaftoya shopping site, we pay the import consumption tax incurred at the time of import on your behalf, so there will be no additional charges other than the total amount you pay at checkout.
〇Check for compatibility
Since all of our product databases are based on North American vehicles (USDM), please check compatibility with Japanese vehicles (JDM) before placing your order. (If you are unsure whether the listed product is compatible with your vehicle, please feel free to contact us. Our support team will investigate for you.)
If you order without confirming compatibility, we cannot accept returns due to incompatibility.
Please note that even if products are sorted by selecting the year, manufacturer, and vehicle model in the tabs on our homepage, it does not necessarily mean they will fit Japanese model vehicles without modification.
All products have been translated into Japanese using translation software. As there may be confusing expressions, please contact us before ordering if you have any questions.
○ Regarding delivery
Shipping costs are paid at the time of payment. Shipping cost estimates are automatically calculated when you enter your shipping address on the checkout page. For large items such as body parts, there may occasionally be a significant discrepancy between the automatically calculated shipping cost and the actual shipping cost. In such cases, we will contact you individually via email.
Basically, all products are shipped internationally from our US warehouse. Unlike domestic delivery in Japan, international delivery takes about 7 to 14 days, so please allow yourself plenty of time when ordering. If you are in a hurry, please contact us in advance to confirm the delivery date. All products are shipped via air freight. They are never shipped by sea freight.
○ Regarding Japanese vehicle inspection compliance
Essentially, all products we handle are designed and manufactured outside of Japan. Please note that they do not comply with the "Japanese vehicle inspection system" at all, and we cannot provide structural review documents or the like for the Japanese inspection system. Therefore, all parts are sold for the purpose of "use on circuits, private land, or off-road," and please install and use them at your own risk.
○ Regarding warranty
Please check the contents of your order immediately upon arrival. Since all products are shipped internationally from outside Japan, there may be delivery damage to packaging boxes or the products themselves. Please understand that we will only provide returns, refunds, or replacement exchanges if you contact us within 7 days of receipt regarding products with delivery damage, defective products, or products different from what was ordered. Furthermore, for products sold through us, we will only handle warranty-related issues "through us." Please note that we do not handle matters through other companies or agents located within Japan.