Box contents:
- Front brake lines x 2
- Rear brake lines x 2
- Banjo bolts x 4
- Crush washers x 8
<span> span>
Installation Instructions
* Brake line installation should be performed by a professional mechanic. Please read these installation instructions carefully and follow them.
Raise the vehicle. Remove the wheels and drain all brake fluid. Carefully remove the existing brake lines from the vehicle, taking care not to splash brake fluid on any painted surfaces. Note the position of the C-clips and banjos (if used). Remove all crush washers from the mating surfaces. The new kit includes all necessary OEM replacement adapters and banjo bolts.
Clean all sealing surfaces and ensure they are in good condition.
Starting from the caliper, fit these lines following the original path of the OEM lines. Use the new crush washers included in the kit. Ensure all positioning tabs and mounting brackets are properly attached to the mating points on the frame or chassis, and that there is no tension on either end of the connections. Do not fully tighten bolts or screw ends until the final step of installation.
Check that the line lengths are correct. Ensure the hoses are not twisted or kinked. The torque lines on the opposite axis must remain parallel along the entire length of the hose. You must check the full range of motion for the suspension and steering to ensure the hoses are not stretched or pinched.
Tighten the banjo bolts and end fittings. When tightening these hoses to factory hard lines, you must use a wrench of the correct size to hold the hard lines in place. Bolts and end fittings must be tightened to the manufacturer's recommended torque specifications. If not specified, tighten to 12–14 ft-lbs.
You are now ready to bleed the brakes. You must use new DOT-approved brake fluid and bleed the system according to the vehicle manufacturer's recommendations.
Warning
Before test driving the vehicle, perform a final check of the lines to ensure all connections are secure and leak-free. The brake pedal should feel firm at this stage. After the first 100 miles of driving, recheck all lines and connections to ensure they are secure and leak-free.
- Mixing rubber hoses and stainless steel replacement lines in the same brake system is not recommended.
- Do not force, twist, or stretch the stainless steel hose assemblies, as this may cause failure.
<span> span>
** **
Legal only for use on competition vehicles not registered or licensed and not for use on public roads or highways. May also be used on other exempt vehicles.
Before Ordering
〇 About Import Consumption Tax
At the Shaftoya shopping site, we pay the import consumption tax incurred at the time of import on your behalf, so there will be no additional charges beyond the total amount paid at checkout.
〇 Confirmation of Compatibility
As our entire product database is based on North American vehicles (USDM), please verify compatibility with Japanese vehicles (JDM) before placing your order. (If you are unsure if a listed product is compatible with your vehicle, please feel free to contact us. Our support team will be happy to investigate for you.)
If you place an order without confirming compatibility, we cannot accept returns due to incompatibility.
Please note that even if products are sorted by selecting the year, manufacturer, and vehicle model via the tabs on our top page, this does not guarantee they will fit Japanese model vehicles without modification.
All products have been translated into Japanese using translation software. As there may be confusing expressions, please contact us before ordering if you have any questions.
○ Regarding Delivery
Shipping costs are paid at the time of settlement. Shipping cost estimates are automatically calculated when you enter your shipping address on the checkout page. For large items such as body parts, the automatic shipping calculation may rarely differ significantly from the actual shipping cost. In such cases, we will contact you individually via email.
All products are generally shipped internationally from our US warehouse. Unlike domestic Japanese shipping, international shipping takes about 7 to 14 days, so please order with plenty of time. If you are in a hurry, please contact us in advance to confirm delivery times. Furthermore, all products are transported by air freight. They are not shipped by sea freight.
○ Regarding Japanese Vehicle Inspection (Shaken) Compatibility
All products handled by our company are designed and manufactured outside of Japan. Please understand that they are not compliant with the "Japanese Vehicle Inspection System," and we cannot provide strength calculation documents or similar paperwork for the Japanese inspection system. Therefore, all parts are sold for the purpose of "use on circuits, private land, or off-road," and installation and use are at your own risk.
○ Regarding Warranty
Please check the contents immediately upon arrival. As all products are shipped internationally from outside Japan, there may be delivery damage to packing boxes or products. We will provide returns, refunds, or replacement exchanges only if you contact us within 7 days of receipt regarding products with delivery damage, defective items, or items different from what was ordered. Please understand that for products sold through our company, warranty support will be handled "exclusively through our company." Please note that we do not handle support through other companies or distributors located in Japan.