The Wisefab BMW E46 angle kit gives you a competitive edge over your rivals on the track. Lightweight and strong lower control arms. Adjustable top mounts. Installation is very simple. Set your preferred toe and enjoy. All parts of the lock kit are provided as spare parts.
There are upper and lower links for the rear, which can improve the car's traction (the upper arm replaces the spring carrier arm). We also offer trailing arm bushings.
If you want to know how the Wisefab Lock kit fits your drift car, please check the fitment under the link or click here.
Scroll down to easily order spare parts here.
Recommended alignment parameters are as follows:
Toe in/out: 0
Camber: -4
Caster: 5
-
High roll center
The Wisefab suspension kit raises the front roll center even on lowered cars, increases roll stiffness, and achieves maximum lock by removing the front anti-roll bar (sway bar). -
Steering geometry correction (Ackermann)
Normally, the inside wheel has a greater angle than the outside wheel in a corner. For drifting, this means a loss of speed and grip; we have corrected this to obtain the best performance. -
Good camber control at high steering angles
At high steering angles, the front wheels get positive camber, which is not a good effect. Front grip decreases, and the contact patch shifts from the inner edge to the outer edge during a turn or flip. While this cannot be eliminated, our geometry has reduced it as much as possible. -
Steering jacking control
During drifting, as the steering angle increases, even the same geometry can cause increased jacking, which can be problematic. We have monitored this and changed the geometry to ensure that handling issues do not occur. -
Predictable self-alignment control
With certain suspension geometries, the steering wheel may lock at the end when the steering angle is high, requiring the driver to apply some force to flip the steering wheel to the other side. We understand the cause and have minimized it, if not eliminated it.
Kit contents:
- Adjustable coilover upper mounts, Formula Drift compliant
- Hub add-ons with hardware
- Lightweight lower control arms
- Assembled tie rods.
- Adjustable lower control arm rear mounts
- Installation guide
Other components, packaging, and clearance.
- This kit assumes there is sufficient clearance for coilovers.
- We recommend a tire diameter of 620mm (235/40 R17) or less.
- This kit requires wide fenders or fender flares.
Before Ordering
〇 Regarding Import Consumption Tax
At the Shafutoya shopping site, we pay the import consumption tax incurred at the time of import on our side, so there will be no additional charges other than the total amount you pay at checkout.
〇Checking Fitment
As our entire product database is based on North American vehicles (USDM), please confirm whether or not they can be installed on Japanese vehicles (JDM) before ordering. (If you are unsure if a listed product fits your vehicle, please feel free to contact us. Our support team will look into it for you.)
If you place an order without confirming fitment, we cannot accept returns due to incompatibility.
Furthermore, please note that even if products are sorted by selecting the year, manufacturer name, and vehicle model in the tabs on our top page, it does not necessarily mean they will fit Japanese model vehicles without modification.
All products have been translated into Japanese using translation software. As there may be confusing expressions, please contact us before ordering if you have any questions.
○ Regarding Delivery
Shipping costs are paid at the time of payment. For shipping cost estimates, they will be automatically calculated when you enter your shipping address on the checkout page. Regarding large items such as body parts, there may rarely be a significant discrepancy between the automatic shipping calculation amount and the actual shipping cost. In that case, we will contact you individually via email.
All products are generally shipped internationally from our US warehouse. Unlike domestic delivery within Japan, international shipping takes about 7 to 14 days, so please order with enough time to spare. If you are in a hurry, please contact us in advance to confirm delivery times. Furthermore, all products are transported by air. They will not be shipped by sea freight.
○ Regarding Japanese Vehicle Inspection (Shaken) Compatibility
Please note that all products we handle are basically designed and manufactured outside of Japan. They are not compliant with the "Japanese Vehicle Inspection System" at all, and we cannot issue documents such as strength calculation reports for the Japanese vehicle inspection system. Therefore, all parts are sold for the purpose of "use on circuits, private property, or off-road," and installation and use are at your own risk.
○ Regarding Warranty
Please check the contents immediately when the product arrives. As all products are shipped internationally from outside of Japan, there may be delivery damage to the packaging box or the product. Please understand that we will only provide returns, refunds, or replacement exchanges if you contact us within 7 days of receipt regarding products with delivery damage, defective products, or products different from your order. Furthermore, regarding products sold through us, we will handle warranty-related matters "only through us." Please note that we do not handle matters through other companies or agents located within Japan.