{"product_id":"wisefab-nissan-r33-front-drift-angle-lock-kit-wf330","title":"WiseFab - Nissan R33 Front Drift Angle Lock Kit (WF330)","description":"\u003cp\u003eIn the Nissan Skyline R33 angle kit, the OEM upper control arms are replaced by Wisefab upper control arms, which improves the kinematics and avoids rubbing issues at full lock. The lower control arms are suitable for S-chassis and R-chassis. The new lower control arms are easy to adjust. The knuckles have built-in Ackermann adjustment, allowing you to maximize lateral grip by fine-tuning the Ackermann setup. All metal components of the Wisefab Nissan Skyline R33 front suspension are made of high-tensile steel, including sheet metal components, tube ends, and rod end housings. We use rod ends and spherical bearings; no rubber bushings are used.\u003c\/p\u003e\n\u003cp\u003eIf you would like to know how the Wisefab Lock kit fits your drift car, please click on \u003cstrong\u003eCheck Fitment\u003c\/strong\u003e below the link or \u003ca href=\"https:\/\/www.wisefab.com\/fitment-calculator\" data-mce target=\"_blank\"\u003ehere!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eScroll down to order spare parts easily here.\u003cbr\u003e\u003cbr\u003eRecommended alignment parameters are as follows:\u003cbr\u003e\u003cstrong\u003eToe in\/out: If Ackermann is 0 or negative, toe is 2mm out. If Ackermann is positive, toe is 0\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCamber: -4.5 +\/-0.5\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCaster: 4.3 +\/-0.5\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eBy installing a Nissan S14 rear subframe onto a Nissan Skyline, you can install the Wisefab Nissan S14 rear suspension kit on your Nissan Skyline.\u003cmeta charset=\"UTF-8\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e\n\u003cspan\u003e65 degrees of lock, parallel steering.\u003cbr\u003e\u003c\/span\u003eEven trackside, you can adjust the steering geometry to positive or negative Ackermann in just a few minutes without disrupting the alignment.\u003cbr\u003eAckermann adjustment kit included.\u003c\/li\u003e\n\n\u003cli\u003e\u003cspan\u003eAdjustable lock stops.\u003c\/span\u003e\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan\u003eOne-piece design\u003c\/span\u003e\u003cbr\u003eThe lower 2-piece arm has been replaced with a one-piece design to increase the system rigidity required for high lock.\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan\u003eHigher roll center (RC).\u003c\/span\u003e\u003cbr\u003eIn the Wisefab Nissan R-chassis knuckle, both joints are dropped, which increases the front RC when the vehicle is lowered, providing more roll and camber gain.\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan\u003eExcellent camber control and minimal bump steer even at high steering angles.\u003cbr\u003e\u003c\/span\u003eIn drift cars, dynamic camber control and bump steer are far more important than static camber control. Wisefab's kinematics ensure that the camber provides excellent front grip and that bump steer is minimized throughout the entire steering range.\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan\u003eSteering jack control.\u003c\/span\u003e\u003cbr\u003eDuring drifting, as the steering angle increases, the same geometry can cause increased jacking, which can become a problem. We have modified the geometry to ensure there are no operational issues.\u003c\/li\u003e\n\n\u003cli\u003e\n\u003cspan\u003eConsistent and predictable self-aligning torque.\u003c\/span\u003e\u003cbr\u003eCaster is not the only important parameter for providing sufficient self-aligning torque, especially at high lock. It is a combination of various parameters to maintain consistent trail and self-aligning torque. With this setup, the steering wheel will always rotate in the direction of travel and will not stick at full lock.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eKit contents:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ePre-set upper and lower control arms\u003c\/li\u003e\n\n\u003cli\u003eKnuckles with hardware\u003c\/li\u003e\n\n\u003cli\u003eAssembled tie rods.\u003c\/li\u003e\n\n\u003cli\u003eInstallation guide.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eOther components, packaging, and clearance.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eS14 hubs are required.\u003c\/li\u003e\n\n\u003cli\u003eThis kit assumes that there is sufficient clearance for the coilovers.\u003c\/li\u003e\n\n\u003cli\u003eThe ride height is designed to be a maximum of 80 mm from the front subframe to the ground.\u003c\/li\u003e\n\n\u003cli\u003eDepending on rim width and ET, wider fenders or fender flares will be required.\u003c\/li\u003e\n\n\u003cli\u003eNo modifications to the inner wheel wells are necessary for tire diameters up to 635 mm (e.g., 225\/45R17, 235\/40R17, 235\/35R18, 255\/30R18).\u003c\/li\u003e\n\n\u003cli\u003eThe minimum rim diameter is 17 inches.\u003c\/li\u003e\n\n\u003cli\u003eThe recommended backspace is approximately 135 mm (7-inch ET45, 8-inch ET35, 9-inch ET20). If the ET is lower, the wheel will shift outward; if the ET is higher, spacers must be used.\u003c\/li\u003e\n\n\u003cli\u003eThis kit is designed and manufactured to be ready for use after installation and toe adjustment.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore ordering\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e○ Regarding import consumption tax\u003cbr\u003eAt Shaftoya shopping site, we pay the import consumption tax incurred upon import on your behalf, so there will be no additional charges other than the total amount paid at checkout.\u003cbr\u003e\u003cbr\u003e○ \u003cspan\u003eConfirmation of fitment\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAs our entire product database is based on North American vehicles (USDM), please confirm whether or not it can be installed on Japanese vehicles (JDM) before ordering. (Please feel free to contact us if you are unsure if a listed product is compatible with your vehicle. Our support team will investigate for you.)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you order without confirming fitment, we cannot accept returns due to incompatibility.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease note that even if a product is sorted by selecting the year, manufacturer, and vehicle model in the tabs on our homepage, it does not necessarily mean that it will fit a Japanese model vehicle without modification.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products have been translated into Japanese using translation software. There may be confusing expressions, so please contact us before ordering if you have any questions.\u003cbr\u003e\u003cbr\u003e○ Regarding delivery\u003cbr\u003eShipping costs are paid at the time of payment. Shipping estimates are calculated automatically when you enter your shipping address on the checkout page. For large items such as body parts, there may occasionally be a significant discrepancy between the automatically calculated shipping cost and the actual shipping cost. In that case, we will contact you individually via email.\u003cbr\u003e\u003cbr\u003eBasically, all products are shipped internationally from our US warehouse. Unlike domestic shipping in Japan, international shipping takes about 7 to 14 days, so please allow plenty of time for your order. If you are in a hurry, please contact us in advance to confirm the delivery date. All products are transported via air freight. They are not shipped by sea freight.\u003cbr\u003e\u003cbr\u003e○ Regarding Japanese vehicle inspection compliance\u003cbr\u003ePlease note that all products we handle are basically designed and manufactured outside of Japan. They do not comply with the \"Japanese vehicle inspection system,\" and we cannot provide strength calculation documents or similar items for the Japanese vehicle inspection system. Therefore, all parts are sold for the purpose of \"use on circuits, private land, or off-road,\" and installation and use are at your own risk.\u003cbr\u003e\u003cbr\u003e○ Regarding warranty\u003cbr\u003ePlease check the contents immediately upon arrival of the product. As all products are shipped internationally from outside Japan, there may be shipping damage to the packaging box or the product. Please understand that we will only handle returns, refunds, or replacement exchanges if you contact us within 7 days of receipt for products with shipping damage, defective products, or products different from what you ordered. Please note that for products sold through us, warranty-related support will be handled \"only through us.\" We do not provide support through other companies or distributors located in Japan.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\n","brand":"WiseFab","offers":[{"title":"Default Title","offer_id":41426218385463,"sku":"WF330","price":403920.0,"currency_code":"JPY","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/7502\/9815\/files\/image_241237b3-8819-4d74-a8ee-d41a450c9d41.jpg?v=1739138521","url":"https:\/\/fivesquareusa.com\/en\/products\/wisefab-nissan-r33-front-drift-angle-lock-kit-wf330","provider":"Shaft Shop","version":"1.0","type":"link"}