{"product_id":"wisefab-toyota-gt86-front-v2-lock-kit-for-front-rack-wf8601","title":"WiseFab - Front V2 Lock Kit for Toyota GT86 Front Rack (WF8601)","description":"\u003cp\u003eThe GT86 Front Position Rack V2 Lock Kit is made of high-strength steel. Although slightly heavier than the V1 kit, it is stronger, stiffer, has more adjustment options, and features improved kinematics. Due to the boxer engine, the original steering rack position was very unsuitable for drifting. Therefore, the steering rack has been moved in front of the crossmember, allowing for the use of preferred rear-sump engines. The main advantage of the front steering rack position is a more precise steering feel at large angles, making the car easier to handle in extreme situations. A \u003cstrong\u003eBMW E9X or Lexus LS (UCF30) steering rack\u003c\/strong\u003e is required for use with this kit to replace the original electric power steering.\u003c\/p\u003e\n\u003cdiv\u003e\n\n\u003cp\u003eIf you would like to see how the Wisefab Lock Kit fits your drift car, please check the \u003cstrong\u003eCHECK FITMENT\u003c\/strong\u003e link below or click \u003ca href=\"https:\/\/www.wisefab.com\/fitment-calculator\" target=\"_blank\"\u003ehere!\u003c\/a\u003e\u003cbr\u003e\u003cbr\u003eRecommended alignment parameters are as follows:\u003cbr\u003e\u003cstrong\u003eToe: 2mm out if Ackermann is 0 or negative. 0 if Ackermann is positive\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eCamber: -6\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eCaster: 5.5\u003c\/strong\u003e\u003c\/p\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eSteering angle available is 65 degrees or more\u003c\/li\u003e\n\n\u003cli\u003eAdjustable Ackermann angle. You can adjust the steering geometry to positive or negative Ackermann in just a few minutes without disturbing the alignment. Ackermann adjustment washers are included in the kit.\u003c\/li\u003e\n\n\u003cli\u003eKnuckles and control arms are made of high-tensile steel. To achieve maximum precision, all parts are machined after welding.\u003c\/li\u003e\n\n\u003cli\u003eCrMo rod ends and sphericals used instead of OEM bushings\u003c\/li\u003e\n\n\u003cli\u003eImproved roll center (RC)\u003cbr\u003eThe knuckles allow the ball joints to sit lower, raising the front RC on lowered cars and increasing roll stiffness. This allows you to remove the front anti-roll bar (stabilizer), which can be very difficult to package when steering angles are large.\u003c\/li\u003e\n\n\u003cli\u003eExcellent camber control and minimal bump steer at high steering angles.\u003cbr\u003eDynamic camber control and bump steer are much more important for a drift car than static camber control. Our kinematics ensure that the camber provides excellent front grip and that bump steer is kept to a minimum throughout the steering range.\u003c\/li\u003e\n\n\u003cli\u003eSteering jacking control\u003cbr\u003eWhen drifting, jacking increases as the steering angle increases, which can be problematic with the same geometry. We have changed the geometry in a way that avoids operational issues.\u003c\/li\u003e\n\n\u003cli\u003eConsistent and predictable self-aligning torque.\u003cbr\u003eCaster is not the only important parameter for providing sufficient self-aligning torque, especially at high lock. It is a combination of various parameters to maintain consistent trail and self-aligning torque. With this setup, the steering wheel always rotates in the direction of travel and will not get stuck at full lock.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eKit contents:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003ePre-set lower control arms\u003c\/li\u003e\n\n\u003cli\u003eKnuckles with hardware\u003c\/li\u003e\n\n\u003cli\u003eAssembled tie rods\u003c\/li\u003e\n\n\u003cli\u003ePre-set adjustable camber plates\u003c\/li\u003e\n\n\u003cli\u003eFront position rack relocation kit\u003c\/li\u003e\n\n\u003cli\u003eCrossmember support\u003c\/li\u003e\n\n\u003cli\u003eInstallation guide\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003eAdditional information:\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003eBMW and Lexus steering rack attachments and crossmember inserts are included in the kit. Modifying the crossmember requires DIY cutting and welding. Please be sure to follow the installation manual.\u003c\/li\u003e\n\n\u003cli\u003eThis kit assumes coilovers with sufficient clearance.\u003c\/li\u003e\n\n\u003cli\u003eDepending on rim width and ET, wider fenders or fender flares will be required.\u003c\/li\u003e\n\n\u003cli\u003eAs the Subaru BRZ engine bay is very wide, we recommend using tires 605 mm or smaller (215\/40R17, 225\/40R17, 225\/35R18, 235\/35R18).\u003c\/li\u003e\n\n\u003cli\u003eIf the tire diameter is up to 635 mm (e.g., 215\/45R17, 225\/45R17, 235\/40R17, 225\/40R18) and the car is lowered, minor modifications to the inner wheel wells will be necessary.\u003c\/li\u003e\n\n\u003cli\u003e18-inch rims are recommended, though 17-inch may also fit.\u003c\/li\u003e\n\n\u003cli\u003eDepending on rim diameter, the recommended backspace is 150–160 mm (7-inch ET45, 8-inch ET35, 9-inch ET25). If the ET is smaller, the wheel will sit further out; if the ET is larger, spacers will need to be installed. \u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\n\u003c\/div\u003e\n\u003cdiv\u003e\n\n\u003cul\u003e\u003c\/ul\u003e\n\n\n\u003c\/div\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eBefore Ordering\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e〇 Regarding Import Consumption Tax\u003cbr\u003eAt Shaftoya Shopping Site, we pay the import consumption tax incurred at the time of import on your behalf, so there are no additional charges beyond the total amount paid at checkout.\u003cbr\u003e\u003cbr\u003e〇 \u003cspan\u003eConfirmation of Compatibility\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eOur entire product database is based on North American vehicles (USDM). Please check whether the product is compatible with Japanese vehicles (JDM) before ordering. (If you are unsure whether a listed product is compatible with your vehicle, please feel free to contact us. Our support team will be happy to investigate for you.)\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIf you place an order without confirming compatibility, we cannot accept returns due to incompatibility.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease note that even if items are sorted by selecting the year, manufacturer, and vehicle model on our homepage tabs, this does not necessarily mean they will fit Japanese models without modification.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAll products have been translated into Japanese using translation software. There may be confusing expressions, so please contact us before ordering if you have any questions.\u003cbr\u003e\u003cbr\u003e○ Regarding Shipping\u003cbr\u003eShipping costs are paid at the time of settlement. An estimate for shipping costs is calculated automatically when you enter your shipping address on the checkout page. For large items such as body parts, there may occasionally be a significant discrepancy between the automatically calculated shipping cost and the actual cost. In such cases, we will contact you individually via email.\u003cbr\u003e\u003cbr\u003eBasically, all products are shipped internationally from our US warehouse. Unlike domestic shipping in Japan, international shipping takes about 7 to 14 days, so please allow yourself plenty of time when ordering. If you are in a hurry, please contact us in advance to check the delivery time. Note that all products are transported by air; they are not shipped by sea.\u003cbr\u003e\u003cbr\u003e○ Regarding Japanese Vehicle Inspection (Shaken) Compatibility\u003cbr\u003ePlease be aware that all products we handle are designed and manufactured outside of Japan. They are not compliant with the \"Japanese Vehicle Inspection (Shaken) system,\" and we cannot provide documents such as strength calculation sheets for that purpose. Therefore, all parts are sold for use on \"circuits, private land, or off-road,\" and installation and use are at your own risk.\u003cbr\u003e\u003cbr\u003e○ Regarding Warranty\u003cbr\u003ePlease check the contents immediately upon arrival. Since all products are shipped internationally from outside Japan, there may be shipping damage to the packing boxes or the products themselves. We will only handle returns, refunds, or replacements for products with shipping damage, defective goods, or items different from your order if you contact us within 7 days of receipt. Please understand that for products sold through us, all warranty-related support will be handled \"exclusively through us.\" We do not provide support through other companies or distributors located within Japan.\u003cbr\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n","brand":"WiseFab","offers":[{"title":"Default Title","offer_id":41426217402423,"sku":"WF8601","price":21878.0,"currency_code":"MOP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0259\/7502\/9815\/files\/image_98fdc8f2-ede2-46a7-b131-b12d44ac82d9.jpg?v=1739138549","url":"https:\/\/fivesquareusa.com\/en-mo\/products\/wisefab-toyota-gt86-front-v2-lock-kit-for-front-rack-wf8601","provider":"Shaft Shop","version":"1.0","type":"link"}